|
|
Build Your Online Product Catalogs?
| Product Name: |
Shoes molding silicone rubber
|
| Supply Ability: |
|
| Related proudcts |
shoes, silicone, silicone for moldin, |
| Specifications |
RTV |
| Price Term: |
FOB/CNF/EXW/CIF |
| Port of loading: |
shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
6~15$ |
|
Shoes molding silicone rubber
Properties and uses:
This series of products are condensation type bi-component materials, is A and B agent by two kinds of agent of components. With good fluidity, high-temperature resistance, corrosion resistance, and tensile, high tensile strength and shrinkage of small, high frequency mode. Can be widely used in glass li resin, epoxy resin, polyurethane foam PU resin molding products and crafts of adornment of copying.
Main technology parameters:
Shoes mold adhesive series models RTV-2-108 RTV-2-208 RTV-2-308
Before the appearance of sulfide White white gray
Viscosity (***) s. 1.5กซ2 1.8กซ2 1.5กซ2
Storage period (month) 2 3 2
Curing temperature curing conditions (c) 25
Vulcanization formulations, 21#
Curing agent number 2%
Working temperature (c) 25
Vulcanized rubber time after the min) 10
Curing time (min) 30
ShaoEr A hardness (degrees) 10กซ12 10กซ12 10กซ12
Resistance to tear strength (N/mm), 8กซ10 7กซ9 8กซ10
Tensile strength (***) 24กซ26 18กซ20 22กซ24
Method of use:
1 take a certain amount of silica gel, said after the quantity by silica gel 2-3%, and add hardener used presently match, in a short time, must use.
2 the agent will join fully mixing rubber, plastic materials into the vacuum pump in 3-5 minutes, the bubble can mould.
3 this series product vulcanization rate and environment temperature, humidity has close relationship, the higher the temperature, humidity, vulcanization faster. Users can choose according to the weather condition, curing agent, adjust dosage of curing agent, thus obtains appropriate vulcanization rate.
Packaging, storage and matters needing attention:
1 this series product base gum 200kg 5kg, with 25 kg, 1kg per drum packaging, and curing agent in 0.75 L/plastic packing.
2 this series products should be sealed storage, and put them in a cool place, prevent the rain, the sun exposure.
3 this product series for half a year, such as the storag |
| Company: |
chunchang silicone rubber Co.,LTD
|
| Contact: |
Ms. huang sunny |
| Address: |
No.126, Building M14, Huanan International Industrial Material City(trading center for hardware, chemical, plastic), Pinghua town, Longgang District, Shenzhen city |
| Postcode: |
518111 |
| Tel: |
86-0755-89636178-811 |
| Fax: |
0755-61658048 |
| E-mail: |
|
|
|
|
Home
